Scuba gears are expensive. If you are an ardent fan of scuba diving, then the right gear can help protect you from staying safe. Regular use of scuba gear can cause it to wear and tear after prolonged use. The right care and maintenance can extend its life and save you on investing in a new one.
Inspecting Your Gear
When you finish with your dive, it is always better to inspect your gear for tears and damages. When you purchase any new gear, it is always better to go through the instruction manuals and have a good understanding of the gear or equipment used for the dive.
If the equipment malfunctions, it is always better to leave the repairs to the experts. If your gear is under warranty, you can write to the scuba gear repair service by mail and await their response on the same. Credible companies like A-1 Scuba located in Littleton, Colorado make use of state of art technology that can have your equipment up and running in no time. They are also certified by top scuba diving equipment manufacturers.
Tips to Take Care of Your Scuba Gear
- Ensure that you inspect your face masks, snorkels and fins for damages
- If the straps are loose or worn, replace them immediately
- Look for debris on your gear. If any, ensure that you clean them thoroughly
- After your dive, ensure to wash your gear with clean water
- Keep your gear hanging in a cool, dry place
- Do not forget about your scuba tank
- Thoroughly rinse it using fresh water
- Keep the cylinder in an upright position or lying down
- Check the tank for the hydrostatic test date
- Do not store the cylinder when its either full or empty as it can contaminate easily
- Your wetsuit needs to be cleaned with fresh water to remove salt water and chlorine
- Turn the suit inside out and allow it to dry in direct sunlight
- Carefully read the instruction manuals for cleaning your BCD’s and regulators
- Check for cracks or damages to the regulators and get the same repaired
- Test the BCD before your dive and ensure that everything is in order
Conclusion
Cleaning and disinfecting your equipment are a must. Bear in mind never to leave your equipment exposed to direct sunlight, as it can cause cracks or degrade the materials. Have a right dive kit handy, so that in case of malfunction, you are well prepared.
